 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| ST380CHPBF Series Vishay High Power Products Phase Control Thyristors (Hockey PUK Version), 960 A FEATURES * Center amplifying gate * Metal case with ceramic insulator * International standard case TO-200AB (E-PUK) * Extended temperature range * Low profile hockey PUK to increase current-carrying capability TO-200AB (E-PUK) RoHS COMPLIANT * Lead (Pb)-free * Designed and qualified for industrial level PRODUCT SUMMARY IT(AV) 960 A TYPICAL APPLICATIONS * DC motor controls * Controlled DC power supplies * AC controllers MAJOR RATINGS AND CHARACTERISTICS PARAMETER IT(AV) TEST CONDITIONS VALUES 960 Ths 80 2220 IT(RMS) Ths 50 Hz ITSM 60 Hz 50 Hz 60 Hz VDRM/VRRM tq TJ Typical 25 12 500 A 13 000 782 713 400 to 600 100 - 40 to 150 V s C kA2s UNITS A C A C I2 t ELECTRICAL SPECIFICATIONS VOLTAGE RATINGS TYPE NUMBER VOLTAGE CODE 04 06 VRSM, MAXIMUM IDRM/IRRM MAXIMUM VDRM/VRRM, MAXIMUM REPETITIVE PEAK AND OFF-STATE VOLTAGE NON-REPETITIVE PEAK VOLTAGE AT TJ = TJ MAXIMUM V V mA 400 600 500 700 100 ST380CH..C Document Number: 94411 Revision: 11-Aug-08 For technical questions, contact: ind-modules@vishay.com www.vishay.com 1 ST380CHPBF Series Vishay High Power Products Phase Control Thyristors (Hockey PUK Version), 960 A ABSOLUTE MAXIMUM RATINGS PARAMETER Maximum average on-state current at heatsink temperature Maximum RMS on-state current SYMBOL IT(AV) IT(RMS) TEST CONDITIONS 180 conduction, half sine wave double side (single side) cooled DC at 25 C heatsink temperature double side cooled t = 10 ms Maximum peak, one-cycle non-repetitive surge current ITSM t = 8.3 ms t = 10 ms t = 8.3 ms t = 10 ms Maximum I2t for fusing I2 t t = 8.3 ms t = 10 ms t = 8.3 ms Maximum I2t for fusing Low level value of threshold voltage High level value of threshold voltage Low level value of on-state slope resistance High level value of on-state slope resistance Maximum on-state voltage Maximum holding current Typical latching current I2t VT(TO)1 VT(TO)2 rt1 rt2 VTM IH IL No voltage reapplied 100 % VRRM reapplied No voltage reapplied 100 % VRRM reapplied VALUES 960 (440) 80 (110) 2220 12 500 13 000 10 500 Sinusoidal half wave, initial TJ = TJ maximum 11 000 782 713 553 505 7820 0.85 0.88 0.25 0.24 1.58 600 1000 kA2s V kA2s A UNITS A C t = 0.1 to 10 ms, no voltage reapplied (16.7 % x x IT(AV) < I < x IT(AV)), TJ = TJ maximum (I > x IT(AV)), TJ = TJ maximum (16.7 % x x IT(AV) < I < x IT(AV)), TJ = TJ maximum (I > x IT(AV)), TJ = TJ maximum Ipk = 2900 A, TJ = TJ maximum, tp = 10 ms sine pulse TJ = 25 C, anode supply 12 V resistive load m V mA SWITCHING PARAMETER Maximum non-repetitive rate of rise of turned-on current Typical delay time Typical turn-off time SYMBOL dI/dt td tq TEST CONDITIONS Gate drive 20 V, 20 , tr 1 s TJ = TJ maximum, anode voltage 80 % VDRM Gate current 1 A, dIg/dt = 1 A/s Vd = 0.67 % VDRM, TJ = 25 C ITM = 550 A, TJ = TJ maximum, dI/dt = 40 A/s, VR = 50 V, dV/dt = 20 V/s, gate 0 V 100 , tp = 500 s VALUES 1000 1.0 s 100 UNITS A/s BLOCKING PARAMETER Maximum critical rate of rise of off-state voltage Maximum peak reverse and off-state leakage current SYMBOL dV/dt IRRM, IDRM TEST CONDITIONS TJ = TJ maximum linear to 80 % rated VDRM TJ = TJ maximum, rated VDRM/VRRM applied VALUES 500 100 UNITS V/s mA www.vishay.com 2 For technical questions, contact: ind-modules@vishay.com Document Number: 94411 Revision: 11-Aug-08 ST380CHPBF Series Phase Control Thyristors Vishay High Power Products (Hockey PUK Version), 960 A TRIGGERING PARAMETER Maximum peak gate power Maximum average gate power Maximum peak positive gate current Maximum peak positive gate voltage Maximum peak negative gate voltage SYMBOL PGM PG(AV) IGM + VGM - VGM TEST CONDITIONS TJ = TJ maximum, tp 5 ms TJ = TJ maximum, f = 50 Hz, d% = 50 TJ = TJ maximum, tp 5 ms TJ = TJ maximum, tp 5 ms TJ = - 40 C DC gate current required to trigger IGT TJ = 25 C TJ = 150 C TJ = - 40 C DC gate voltage required to trigger VGT TJ = 25 C TJ = 150 C DC gate current not to trigger IGD TJ = TJ maximum DC gate voltage not to trigger VGD Maximum gate current/voltage not to trigger is the maximum value which will not trigger any unit with rated VDRM anode to cathode applied Maximum required gate trigger/ current/voltage are the lowest value which will trigger all units 12 V anode to cathode applied 200 100 40 2.5 1.8 1.0 10 VALUES TYP. MAX. UNITS 10.0 2.0 3.0 20 5.0 200 3.0 - W A V mA V mA 0.25 V THERMAL AND MECHANICAL SPECIFICATIONS PARAMETER Maximum operating junction temperature range Maximum storage temperature range Maximum thermal resistance, junction to heatsink SYMBOL TJ TStg RthJ-hs DC operation single side cooled DC operation double side cooled DC operation single side cooled DC operation double side cooled TEST CONDITIONS VALUES - 40 to 150 0.09 0.04 0.02 0.01 9800 (1000) 83 See dimensions - link at the end of datasheet N (kg) g K/W UNITS C Maximum thermal resistance, case to heatsink Mounting force, 10 % Approximate weight Case style RthC-hs TO-200AB (E-PUK) RthJ-hs CONDUCTION CONDUCTION ANGLE 180 120 90 60 30 SINUSOIDAL CONDUCTION SINGLE SIDE DOUBLE SIDE 0.010 0.012 0.015 0.022 0.036 0.011 0.012 0.015 0.022 0.036 RECTANGULAR CONDUCTION SINGLE SIDE 0.007 0.012 0.016 0.023 0.036 DOUBLE SIDE 0.007 0.013 0.017 0.023 0.037 TJ = TJ maximum K/W TEST CONDITIONS UNITS Note * The table above shows the increment of thermal resistance RthJ-hs when devices operate at different conduction angles than DC Document Number: 94411 Revision: 11-Aug-08 For technical questions, contact: ind-modules@vishay.com www.vishay.com 3 ST380CHPBF Series Vishay High Power Products Maximum Allowable Heatsink T emperature (C) 150 140 130 120 110 100 90 80 70 60 50 40 0 100 200 300 400 500 600 700 800 Average On-s tate Current (A) Fig. 1 - Current Ratings Characteristics Maximum Allowable Heatsink T emperature (C) Conduc tion Angle Phase Control Thyristors (Hockey PUK Version), 960 A Maximum Allowable Heatsink T emperature (C) 150 140 130 120 110 100 90 80 70 60 50 40 30 20 0 500 1000 1500 2000 2500 Average On-state Current (A) Fig. 4 - Current Ratings Characteristics Maximum Average On-state Power Loss (W) 2500 180 120 90 60 30 Conduc tion Period S 380CH..C S T eries (S ingle S Cooled) ide RthJ-hs (DC) = 0.09 K/ W S 380CH..C S T eries (Double S Cooled) ide RthJ-hs (DC) = 0.04 K/ W 30 60 90 120 180 30 60 90 120 180 DC 150 140 130 120 110 100 90 80 70 60 50 40 30 20 0 200 400 30 S 380CH..C S T eries (S ingle S ide Cooled) R thJ-hs (DC) = 0.09 K/ W 2000 RMS Limit 1500 Conduc tion Period 1000 Conduction Angle 60 90 120 600 500 180 DC S 380CH..C S T eries T = 150C J 0 400 800 1200 1600 0 Average On-state Current (A) Fig. 5 - On-State Power Loss Characteristics 800 1000 1200 1400 Average On-state Current (A) Fig. 2 - Current Ratings Characteristics Maximum Allowable Heatsink Temperature (C) 150 140 130 120 110 100 90 80 70 60 50 40 30 20 0 400 30 Maximum Average On-s tate P ower Loss (W) S 380CH..C S T eries (Double S Cooled) ide RthJ-hs (DC) = 0.04 K/ W 3500 3000 2500 2000 RMS Limit 1500 Conduc tion Period DC 180 120 90 60 30 Conduction Angle 60 90 120 180 1000 500 0 0 500 1000 1500 2000 2500 Average On-state Current (A) Fig. 6 - On-State Power Loss Characteristics S 380CH..C S T eries TJ = 150C 800 1200 1600 Average On-state Current (A) Fig. 3 - Current Ratings Characteristics www.vishay.com 4 For technical questions, contact: ind-modules@vishay.com Document Number: 94411 Revision: 11-Aug-08 ST380CHPBF Series Phase Control Thyristors Vishay High Power Products (Hockey PUK Version), 960 A Peak Half Sine Wave On-s tate Current (A) Peak Half S Wave On-state Current (A) ine 12000 11000 10000 9000 8000 7000 6000 5000 1 At Any R ated Load Condition And With Rated VRRM Applied Following S urge. Initial T = 150C J @60 Hz 0.0083 s @50 Hz 0.0100 s 13000 Maximum Non Repetitive S urge Current Versus Puls T e rain Duration. Control 12000 Of Conduc tion May Not Be Maintained. Initial T = 150C J 11000 No Voltage Reapplied Rated VRRM Reapplied 10000 9000 8000 7000 6000 S 380CH..C S T eries S 380CH..C S T eries 10 100 5000 0.01 0.1 1 Number Of Equal Amplitude Half Cycle Current Pulses (N) Fig. 7 - Maximum Non-Repetitive Surge Current Single and Double Side Cooled 10000 Instantaneous On-state Current (A) T = 25C J T = 150C J Puls T e rain Duration (s) Fig. 8 - Maximum Non-Repetitive Surge Current Single and Double Side Cooled 1000 S 380CH..C S T eries 100 0.5 1 1.5 2 2.5 3 3.5 Instantaneous On-state Voltage (V) Fig. 9 - On-State Voltage Drop Characteristics T ransient T hermal Impedanc e ZthJ-hs (K/W) 0.1 S 380CH..C S T eries 0.01 S teady S tate Value R thJ-hs = 0.09 K/ W (S ingle S ide Cooled) R thJ-hs = 0.04 K/ W (Double S ide Cooled) (DC Operation) 0.001 0.001 0.01 0.1 S quare Wave Pulse Duration (s) 1 10 Fig. 10 - Thermal Impedance ZthJ-hs Characteristics Document Number: 94411 Revision: 11-Aug-08 For technical questions, contact: ind-modules@vishay.com www.vishay.com 5 ST380CHPBF Series Vishay High Power Products 100 Instantaneous Gate Voltage (V) R tangular gate pulse ec a) Recommended load line for rated di/ dt : 20V, 10ohms; tr<=1 s b) Recommended load line for 10 <=30% ra ted d i/ dt : 10V, 10ohms Phase Control Thyristors (Hockey PUK Version), 960 A (1) PGM = 10W, tp (2) PGM = 20W, tp (3) PGM = 40W, tp (4) PGM = 60W, tp (a) (b) T j=-40 C = 4ms = 2ms = 1ms = 0.66ms tr<=1 s T j=25 C j=150 C T 1 VGD IGD 0.1 0.001 0.01 (1) (2) (3) (4) Device: S 380CH..C S T eries 0.1 1 F requency Limited by PG(AV) 10 100 Insta ntaneous Gate Current (A) Fig. 11 - Gate Characteristics ORDERING INFORMATION TABLE Device code ST 1 1 2 3 4 5 6 7 38 2 - 0 3 CH 4 06 5 C 6 1 7 8 PbF 9 Thyristor Essential part number 0 = Converter grade CH = Ceramic PUK, high temperature Voltage code x 100 = VRRM (see Voltage Ratings table) C = PUK case TO-200AB (E-PUK) 0 = Eyelet terminals (gate and auxiliary cathode unsoldered leads) 1 = Fast-on terminals (gate and auxiliary cathode unsoldered leads) 2 = Eyelet terminals (gate and auxiliary cathode soldered leads) 3 = Fast-on terminals (gate and auxiliary cathode soldered leads) 8 9 - Critical dV/dt: Lead (Pb)-free None = 500 V/s (standard selection) L = 1000 V/s (special selection) LINKS TO RELATED DOCUMENTS Dimensions http://www.vishay.com/doc?95075 www.vishay.com 6 For technical questions, contact: ind-modules@vishay.com Document Number: 94411 Revision: 11-Aug-08 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1 |
Price & Availability of ST380CHPBF
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |